TIG 500i AC/DC
Welding current continuously adjustable from 5 to 500 amperes.
• Compact and innovative design
• Sturdy metal housing
• Protective cover over the control panel
• Standard power and voltage display with hold function
• Digital control of all welding parameters
• Ability to save multiple welding programs
• Self-diagnosis - Setup.
• Very good welding properties in TIG and MMA with each electrode type, except
cell electrodes
• Low energy consumption
• Automatic voltage compensation of ± 15% mains input fluctuations
• Temperature monitored power block
• "Energy saving" function for fan and water cooling unit
• Protection class IP 23 S, enabling use even in harsh working conditions
• Can be operated on generators
• Lower power consumption.
• When using TIG Up / Down burners, welding parameters can be set directly with the
Change burner
• VRD (Voltage Reduction Device) function - a device around the open circuit voltage
lower than 13V. This allows the machine to be used in environments where
the risk of electric shock due to water, moisture or heat is particularly high
is. The ignition properties are thereby slightly reduced.
Burner connection safely in the device interior
digital current indicator, current I, current II and
S-test function
Forced shutdown in case of non-ignition of the arc
in 2 and 4-stroke
electronic inrush current damping
TIG ignition via HF or via Lift-Arc function
Control functions: 2/4-stroke, current I and II, pulse adjustable,
0.5 Hz to 5 kHz, pulse automatic, current start value, current increase,
Current sink, waveform (square, sine), balance adjustable,
End crater filling current, final current value, hotstart adjustable,
Arcforce adjustable, antistick, jobs storable
Up / Down - burner for adjustment on the burner
Automatic fault diagnostics display
VRD Volt Reduced Device - Reduced welding voltage
Protection of the control by disc, fully insulated handle
Temperature-controlled fan, thermal overload protection
Remote control box for foot and handheld remote controls
Additionally with the AC / DC version: Infinitely adjustable
AC frequency, balance, waveform: sine, rectangle,
Rectangle with DC component and triangle
OPTIONS:
Automatic TIP for single-button burners for changing
between current I and current II
higher ED, by stronger fan
Automation Interface
Technical specifications
Mains voltage 400 V, 3 phases
Fuse 32 A slow
Power consumption 26.0 kVA
Cos Phi 0.9
Adjustment range TIG 5-500 A / MMA 15-400 A
Open circuit voltage 14 - 72 V.
Solation class F(155 ° C)
Cooling type F
Weight 54 kg
Duty cycle 60 440 A / 27,6 V
Duty cycle 100 380 A / 25.2 V
Degree of protection IP 23
Dimensions L x W x H (mm) 1050 x 540 x 970
• Compact and innovative design
• Sturdy metal housing
• Protective cover over the control panel
• Standard power and voltage display with hold function
• Digital control of all welding parameters
• Ability to save multiple welding programs
• Self-diagnosis - Setup.
• Very good welding properties in TIG and MMA with each electrode type, except
cell electrodes
• Low energy consumption
• Automatic voltage compensation of ± 15% mains input fluctuations
• Temperature monitored power block
• "Energy saving" function for fan and water cooling unit
• Protection class IP 23 S, enabling use even in harsh working conditions
• Can be operated on generators
• Lower power consumption.
• When using TIG Up / Down burners, welding parameters can be set directly with the
Change burner
• VRD (Voltage Reduction Device) function - a device around the open circuit voltage
lower than 13V. This allows the machine to be used in environments where
the risk of electric shock due to water, moisture or heat is particularly high
is. The ignition properties are thereby slightly reduced.
Burner connection safely in the device interior
digital current indicator, current I, current II and
S-test function
Forced shutdown in case of non-ignition of the arc
in 2 and 4-stroke
electronic inrush current damping
TIG ignition via HF or via Lift-Arc function
Control functions: 2/4-stroke, current I and II, pulse adjustable,
0.5 Hz to 5 kHz, pulse automatic, current start value, current increase,
Current sink, waveform (square, sine), balance adjustable,
End crater filling current, final current value, hotstart adjustable,
Arcforce adjustable, antistick, jobs storable
Up / Down - burner for adjustment on the burner
Automatic fault diagnostics display
VRD Volt Reduced Device - Reduced welding voltage
Protection of the control by disc, fully insulated handle
Temperature-controlled fan, thermal overload protection
Remote control box for foot and handheld remote controls
Additionally with the AC / DC version: Infinitely adjustable
AC frequency, balance, waveform: sine, rectangle,
Rectangle with DC component and triangle
OPTIONS:
Automatic TIP for single-button burners for changing
between current I and current II
higher ED, by stronger fan
Automation Interface
Technical specifications
Mains voltage 400 V, 3 phases
Fuse 32 A slow
Power consumption 26.0 kVA
Cos Phi 0.9
Adjustment range TIG 5-500 A / MMA 15-400 A
Open circuit voltage 14 - 72 V.
Solation class F(155 ° C)
Cooling type F
Weight 54 kg
Duty cycle 60 440 A / 27,6 V
Duty cycle 100 380 A / 25.2 V
Degree of protection IP 23
Dimensions L x W x H (mm) 1050 x 540 x 970